Spray Foam Roofing services in Mount Pleasant, WI

Trusted Spray Foam Roofing Services in Mount Pleasant, WI

Professional SPF roof installation, coating, and insulation in Mount Pleasant, WI. Free inspections. Call today for a no-obligation estimate.

Licensed & Insured 4.6-Star Rated 24/7 Emergency Service Serving Mount Pleasant
18,303+ Projects Completed
16,351+ Happy Customers
1,881+ 5-Star Reviews
22+ Years Experience

Spray Foam Services in Mount Pleasant

Comprehensive spray foam roofing and insulation services tailored for Mount Pleasant properties.

Roof Restoration

When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.

Roof Inspection

Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.

Spray Foam Roofing Repair

From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.

Roof Leak Repair

Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.

Roof Waterproofing

Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.

Spray Foam Roofing

Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.

Attic Insulation

Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.

Metal Roof Coating

Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.

Roof Replacement

Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.

Silicone Roof Coating

Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.

Storm Damage Roof Repair

Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.

Commercial Roof Restoration

Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.

Crawl Space Insulation

Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.

Flat Roof Repair

Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.

Roof Maintenance

Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.

About Lapolla Industries in Mount Pleasant, WI

Property owners in Mount Pleasant, WI deal with the same roofing and insulation challenges as everywhere else — leaking flat roofs, sky-high energy bills, deteriorating roof coatings, and contractors who apply band-aid fixes that fail within a season. Lapolla Industries takes a different approach: we find the root cause, apply the right spray foam solution, and back it with a real warranty.

With over 28,398 residents depending on reliable buildings, Mount Pleasant needs contractors who show up, do the work right, and stand behind it. Lapolla Industries has built our reputation on exactly that — thousands of spray foam roofing and insulation projects completed nationwide, with the same attention to quality whether the building is a 500-square-foot garage or a 100,000-square-foot warehouse.

Spray polyurethane foam applied to the underside of a metal roof deck in Mount Pleasant

Why Mount Pleasant Property Owners Choose Us

Here is what sets Lapolla Industries apart from other contractors in Mount Pleasant.

Energy Savings Guarantee

SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.

Seamless Application

Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.

Industry Pioneer

Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.

Local Expertise

Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.

Manufacturer Warranties

Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.

Frequently Asked Questions

Have questions about spray foam in Mount Pleasant? We have answers.

Are your spray foam contractors licensed and insured in Mount Pleasant?

Yes. Every Mount Pleasant crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.

Can spray foam fix a leaking crawl space in Mount Pleasant?

Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Mount Pleasant homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.

How much does spray foam insulation cost in Mount Pleasant?

Spray foam insulation costs in Mount Pleasant typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Mount Pleasant homeowners see a full return on investment through energy savings within 3 to 5 years.

Can you apply spray foam roofing over an existing roof in Mount Pleasant?

In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Mount Pleasant crews evaluate the existing substrate to ensure it is structurally sound before application.

What is the difference between open-cell and closed-cell spray foam?

Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Mount Pleasant we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.

How do I know if my commercial roof needs restoration or replacement?

If your commercial roof in Mount Pleasant is structurally sound but showing surface deterioration — cracked coatings, minor leaks, UV damage — restoration with SPF and a new coating system is likely the better investment. If there is widespread substrate damage, saturated insulation, or structural concerns, full replacement may be necessary. Our inspection will determine which option is right.

What Our Customers Say

Our reputation is built on results. Here is what our customers say.

★★★★★

"They sprayed closed-cell foam in our attic and the difference was immediate. Our upstairs bedrooms are finally comfortable year-round and our heating bill dropped by about thirty percent. The crew was in and out in one day."

— Edward Yamamoto
★★★★★

"Our 18-year-old roof was showing its age but still structurally sound. Lapolla Industries recommended restoration over replacement and it was the right call. New coating, sealed seams, and a 15-year warranty. Smart investment."

— Michelle Preston
★★★★★

"We needed our concrete roof deck waterproofed before installing new equipment on it. The crew applied a monolithic membrane that handles foot traffic and ponding water. Two years in and zero issues. Money well spent."

— Steven McAllister

Nearby Cities We Serve

We also provide spray foam roofing and insulation services in these neighboring communities.

Find Us in Mount Pleasant

Get a Free Estimate in Mount Pleasant, WI

Call today for a no-obligation spray foam roofing or insulation estimate anywhere in Wisconsin.

(866) 605-0362 — Free Estimate